EmbroideryConnect Machines List

EmbroideryConnect Machines List

The following is a list of machines known to have been tested and work without issues on EmbroideryConnect. Even though your machine is not listed it does not mean it is not supported.

Generally if the embroidery machine has an native USB port it will support the EC device, however some older embroidery machines may use different USB standards that require a hub or special configuration.

If you want to inform Wilcom of a machine model that is not listed please submit a support ticket.


BrandModelController ModelFirmware Version
Avancé1501C (2019 model) *V2.4.1.18.B1402
Babylock
Aventura II


BabylockV​​​​aliant
BAI
Vision 1501


BarudanBEDSHE-ZQ-BI5C
BarudanBEKT 1501 CBII
BarudanBEKY-Z1502CII(CS) V2.40 R00V2.50 R00
BarudanBEKY-S1504CII
BarudanBEVS-Z1515C
BarudanBEVT-S1501CAII
BarudanBEVT-Z1501CBII
BarudanBEXS-CLY814
BarudanBEXS-S1515C
BarudanBEXT-S1501CBII
BarudanBEXY-S1504CII
BarudanBEXY-S1506CII
BarudanBEXY-S1508CII
BarudanBEXY-Y912F
BarudanBEXY-Z1508C
Bernina830
Bernina730
Bernina640
BerninaB590
BerninaB78035.13.19
BrotherPR-1050X
BrotherPR670e
BrotherPR670
Brother1050x
BrotherPR1000e
BrotherPR1050 Pro
BrotherPR1055X
DahaoA15
DahaoA98
Dahao528
FeiyaCTF1501
HappyHCS2-1201 #
HappyHCD2-1501
HappyHCH_Plus ^
HoliaumaH01501H
Husqvarna VikingDESIGNER TOPAZ™ 50
RicomaCHT Range 1
RicomaCHT Range 2
RicomaEM1010
RicomaMT1501
RicomaSWD-1201 Area 800 x 500 mm
RicomaTC1501 @
SWFB-T1201C
SWFES-T1501C
SWFE-T1501C #
SWFE-UH1504D-45
SWFE-UH1506-45
SWFE WD906-75
SWFKS-UH1206-45
SWFK-UH1508D-45 Dual Function 8 Head ^
SWFMAN-12Version 2018-9-21 Revision
4158M
SWFMAS-12
TajimaNEO TEJT II C-1501
TajimaSAI
TajimaTEHX-C1501
TajimaTFMX-IIC1506 **Ver 5.92
TajimaTFMX-IIC1508*
TajimaTFMX-C1501
TajimaTMBR-S1501C(XC1A) (360x500) S
TajimaTMBP 1501XC1A
TajimaTMCE-60912w/ USB drive simulation device
TajimaTMEX-C1501FDD Emulator
TajimaTMFX-C906FDD Emulator
TajimaTMFX-IIC1502 ** / ^^
TajimaTMFX-IIC1504 *
TajimaTMWX-C1501 *X21
TajimaTMAR-K1504C *(LCD OP 12.1in[A])
TajimaTMAR-K1508C
TajimaTMBP-SC1501
TajimaTMBP-SC1501C
TajimaTMBU-S1401C / XC1-A
TajimaTMAR-K1504c
TajimaTMAR-K1506c
TajimaTMAR type 1, TMAR type 2
ToyotaESP 9100 NET
ZSKZSK Sprint 6
ZSKRacer 45
ZSKJGVA 0109-550


* Works with serial interface turned off

^ Must use a powered USB hub, as the machines USB power output is not suffice for the device.

# Some models require a USB HUB

@ Enable the two boxes Disabled Serial Interface and the USB Drive compatibility mode

** Disable Serial Interface and USB Drive compatibility Mode box ticked 

^^ EmbroideryConnect Folder : Root 

 


Notes :

1. Barudan machines may experience a slight delay when loading the designs on to the embroidery connect device.

2. Tajima machines with a X16 Controller Model require the latest EmbroideryConnect 1.01 firmware loaded. 

3. RICOMA TC1501 - Enable the two boxes Disabled Serial Interface and the USB Drive compatibility mode  [steps here]   

4. Tajima machines with USB drive simulation device [model TMCE-60912] - In the Embroidery Hub > Advance Settings > Machine Compatibility . Enable Emulate EC to be box [then Select YE-DATA]  [Memory size : 32MB]