Pre-requisite: Temporarily Disable your Antivirus before installing the HASP Driver. 

There are two ways to install HASP Driver: Update the HASP Driver by using Sentinel HASP/LDK Windows GUI Run-time Installer or Sentinel HASP/LDK Command link Run-time installer.    Please note: Driver versions may vary.

METHOD 1 on installing Sentinel HASP/LDK Windows GUI Run-time Installer

STEPS:

1. Download "Sentinel HASP/LDK Windows GUI Run-time Installer" from here

Filename: Sentinel_LDK_Run-time_setup.zip
File Size: 23.46 MB

2. It will then open a new site "THALES Customer Support Portal"  

3. Click DOWxxxxxx  as illustrated in the screenshot to download the newest HASP Driver version.

[The next page will look like this]

4. Click the green ACCEPT button after reading the End User License Agreement [EULA]. 

5. Save the file in DOWNLOADS Folder

6. Extract SentinelLDKRun-time_setup.zip by Right-clicking the  SentinelLDKRun-time_setup.zip 

7. Select Extract All 

8. Open the SentinelLDKRun-time_setup folder until you see HASPUserSetup.exe

9.  Right-click HASPUserSetup.exe 

10. Select Run as administrator

11. Follow the prompts until you completely install the HASP Driver.

[refer to the Readme file included in the package for details]

RESULT:  It will then install the latest version of the HASP Driver. You can verify this by opening the Programs and Features > Control Panel\Programs\Programs and Features then Locate Sentinel Run-time

METHOD 2 on installing Sentinel HASP/LDK COMMAND link Run-time Installer

STEPS:

1. Download the Sentinel HASP/LDK Windows Command Line Runtime Installer from here

Filename: Sentinel_LDK_Run-time_cmd_line.zip
File Size: 22.71 MB

The next page will look like this: 

2. Click the green  I agree button after reading the End User License Agreement.

3. Once the file Sentinel HASP/LDK Windows Command Line Runtime Installer is downloaded, extract the folder Sentinel_LDK_Run-time_cmd_line.zip, refer to the Readme file included in the package for details. and continue to install the driver.

Follow the steps accordingly:

1) Copy the downloaded “haspdinst.EXE” file to “C:\HASP” folder ( you need to create a folder of “C:\HASP”)

2) Right-click on the Windows “Start” button

3) In the right-click menu, click on “Command Prompt (Admin)” menu

4) Click on OK button in the warning message to allow it to run

5) In Command Prompt box, type command line (you may copy and paste it into the box): cd\

C:\HASP\haspdinst –r –purge

6) Hit “Enter” key

Note: seconds later, it says it ran successfully.

7) In Command Prompt box, type command line (you may copy and paste it into the box):

C:\HASP\haspdinst - i -kp

8) Hit “Enter” key

RESULT: At this point, the reinstalling HASP driver procedure is done. Once installed, restart the PC and re-launch the installation.

IMPORTANT: Enable back your Antivirus to continuously protect your computer.