NO DEFAULT MAIL CLIENT DETECTED when sending design via email.

NO DEFAULT MAIL CLIENT DETECTED when sending design via email.

Scenario: The error prompts when you send a design via email.
Error: No default mail client detected.





This error concludes that the default app is a webmail, then it cannot work.
It has to be a Desktop email client, for instance, Outlook 365.



If not, in your Windows search box, type Default. 
Select default app settings. 
Check if your default Email is Outlook then it should allow you to send out the approval sheet via Send PDF via Email.  

If the customer is using the Outlook 365, send the report and the Support team will investigate further.



    • Related Articles

    • Resizing an embroidery design

      To resize an embroidery design in WilcomWorkspace: Log into WilcomWorkspace. Browse to Studio from the left-side menu Open your embroidery design In the right-side Edit panel, change the Width or Height of the design and press Enter the apply the ...

    • Colors in Embroidery Machine Stitch Files and the Wilcom Default Color Palette

      Wilcom API Support Note: Colors in Embroidery Machine Stitch Files and the Wilcom Default Color Palette INTRODUCTION – A STITCH FILE HAS NO COLOR INFORMATION Please click on the attachment below to read through the document.

    • What file format can I convert my design to in WilcomWorkspace Studio?

      Convert is to save the design to other file formats like lower version of EMB and stitch files like TBF, DST etc. EMB file format version from e2, e3, e4.0, e4.1, e4.2. The stitch formats you can convert your design to are as listed below: Production ...

    • How To Set the Default GPU for Applications - ES

      In some laptops or desktops they are supplied with 2 graphics processors one is normally a on-board lower end GPU while the other is a more higher performance GPU. ES should be set to use the high performance card as it is an graphics intensive ...

    • Where is the Design Properties menu?

      Symptom: The first time that you use e3 software after updating Wilcom software from an older version, you might be puzzled that you cannot find the “Design Properties” menu. Solution: The “Design Properties” menu has been relocated into another menu ...