EmbroideryConnect Firmware - Current Version 1.2.0

What’s new in firmware 1.2.0

• Added USB drive compatibility mode to improve connectivity with some embroidery machines.
• Support for Tajima machine with X16 controllers (Note for Tajima X16 controllers both USB drive compatibility and Disable serial interface need to be enabled in the settings.)

Download latest Firmware

Instructions for updating the EmbroideryConnect Firmware :

Updating an EC device that has been already setup:

1. Open EmbroideryHUB --> select EC device settings and ensure Disable Serial interface is unchecked.
   
2. Remove the EC device from EmbroideryHUB
   
3. Connect the EC device to the PC and open EmbroideryHUB.
   
4. Add the EC device back into EmbroideryHUB and open the EC device settings.
   
5. In the advanced setting make sure the largest available memory size is selected and disable serial is unchecked.
   
6. Enter the info section click Update Firmware… then click Browse and select the firmware file which was downloaded. 
   

1. Connect the EC device to the PC and open EmbroideryHUB.
   
2. Add the EC device back into EmbroideryHUB and open the EC device settings.
   
3. In the advanced setting make sure the largest available memory size is selected and disable serial is unchecked.
   
4. Enter the info section click Update Firmware… then click Browse and select the firmware file which was downloaded.